Lake CX402 Cycling Shoe - Men's reviews and deals for sale
Like gloves for your feet, the Lake CX402 Men’s Shoes bring custom fit to the cycling masses. Lake begins by using kangaroo leather to construct the uppers. Known for its suppleness and durability, the leather is combined with mesh panels and perforations to increase airflow and keep your feet cool. These shoes only get better with time.
And while comfortable uppers are a must for long hours in the saddle, those long hours will be excruciating without a sole that optimizes power transfer. Lake places the kangaroo uppers on its Custom Fit carbon fiber sole. The soles are heat moldable so that every inch of your feet is supported. The carbon fiber provides a stiff platform to transfer power straight to the pedals.
Two Boa closures wrap the shoes around your feet. They are individually adjustable to secure your heel while decreasing pressure on your forefoot. Combined with the heat-molded soles, you won’t need to crank down on the closures to keep your feet in your shoes.
$349.95
$244.97
$244.97
Product Specifications
Brand | Lake |
---|---|
Category | Road Bike Shoes |
Upper Material | kangaroo leather |
Lining | perforated kangaroo leather |
Closure | Dual Boa |
Sole | Custom Fit carbon fiber |
Cleat Compatibility | 3-hole road |
Recommended Use | cycling |
Manufacturer Warranty | 2 years |
Similar Products
Lake CX402 Cycling Shoe - Men's Reviews
Joshua T.
May 29, 2020Not Right for My Feet
Shoes are a very personal thing, but these just did not work for me feet. The Race Last that Lake uses on their two highest models is very narrow and the carbon sole ramps up onto the sides of the feet, which to me was extremely uncomfortable (and a bit of overkill, as much as I like a nice stiff sole). That said, the kangaroo leather uppers are plush and cozy. I had kangaroo leather… read more on my old Fiziks and it's hard to find any material more comfortable. If you have narrower feet, maybe consider these. But mine are pretty wide. I traded for the CX241's and they might be the most comfortable shoes I have ever worn.
Michel L.
May 14, 2020Didn't fit
I referred to the chart and ordered a 42 which was cross referenced as a 9.5. Shoe is too small for my foot.
Jody R.
April 6, 2020Fit like a glove with Superfeet
I put these things in the oven and made them fit like a glove after I installed Superfeet insoles. The stock insoles have a little radius behind the heel that hurt like hell the first time I used them. Also, the US sizing on the box is incorrect. Go with the sizing chart on the webpage.
Sig
September 30, 2019Worth every penny
Had my feet going numb after 40 miles. I tried numerous other shoes with no luck. I finally stepped up and ordered the moldable shoes..... what a difference!!
William E.
October 19, 2018Stiff and Narrow-ish
I was caught between sizes on this shoe. I wear an 11.5 in a sneaker, and I ordered both a 45.5 and 46 in this shoe. First off, the heat molding is definitely not a gimmick (I was skeptical). After molding the shoe, it holds my heel much better and that helps when I'm picking up the pedals. I think the shoe fits a little narrow, but as it turns out that's as much a product of… read more Lake's insole as anything with the design of the shoe. I found that with the Lake insole, I felt a little compression along the outside of my foot, which seemed to result from the insole's design. It places your foot in a tub in the insole INSIDE the carbon fiber tub-- and it's that tub that makes the shoe so great. You're foot is as much IN the insole as it's ON the insole in the shoe. It's fat and curves up on the outside of the insole, taking up a lot of real estate inside the shoe. I removed the insoles from my old pair of Specialized shoes and put them in there and it's fantastic (I think anything with a flat outside perimeter would be similarly effective). Now my foot can use the entirety of the width of the shoe. I have read some criticism that it's hard to adjust the tightness of the BOA knobs on the bike, but I didn't have much problem. I just pull the knob and that pops it loose, and then pushing it in gives me a lot more room to tighten it back down. These shoes are a big lick. No doubt they're expensive and I was extremely nervous about settling on a size with these. If you nail the size, everything you've read about them is true: spectacular kicks.
Michael G.
January 13, 2017Only shoe that works for me.
I've put 8,000 miles and about 5 crashes on my current pair of CX402s. While they are torn up, they still perform flawlessly. I have tried several other pair of shoes and constantly have my feet going numb. The 402s felt a little awkward out of the box, but after a few rides and some heat molding they felt great. Quality is top notch as should be expected from a shoe at this price… read more point. The only thing to be aware of is they take forever to dry, which again, is to be expected of a leather shoe. For me things hit the nail square on the head.
chetnlisa
January 18, 2016Work them into shape
I too experience the sole digging into the inside of my foot when I first tried them on. I wasn't concerned as the soles are intended to be form fitting. I followed the heating instructions but didn't get it right the first time. At 200 degrees for 5 minutes I just didn't get them malleable enough until the 3rd heating whereby I went a little hotter by 5 degrees and another minute.… read more They definitely smelled like they were well done but the payoff was that I was finally able to move the inside of the sole wide enough to fit my very high arched feet. Believe me that I was at the point of return before I went all the way up in temp. After that the key is to use (assuming you are looking for additional arch support) something cylindrical and solid-I used a wooden baker's rolling pin-to stand and firmly roll your the shoe over repeatedly right under the arch of your foot. Then promptly sit and squeeze the sides working from the heal forward. The trick for me to get the inside wide enough to feel snug was to put all my weight to lean into the shoe so that the inside of your foot is pushing the sole outward. I got them to where they, as Lake describes, feel like slippers. For the record, I also purchase the Diadora Vortex Pros that CC had a smoking deal on recently. Side by side, the Lake's kicked arse by far. There is a striking difference in quality. In my opinion (duh, I'm writing this), the Diadora's felt/looked cheap by comparison. I dedicated a disproportionately excessive period of time to evaluate the two shoes side by side in terms of materials, build quality and overall value for the price. Two primary reasons the Lakes are worth the extra buck is that the CF sole is hefty and well laid out with cleat alignment guides and heavy duty stainless threaded inserts. The leather is extremely supple and claimed by Lake to be more durable than cow hide. CC's policy is rock solid on returns so indulge yourself by trying on a pair. Just get your oven finely tuned until those soles are singing your song...
Travis Tzioumis
July 22, 2015Lake Carbon Shoe Heat Molding
GV
January 14, 2015Great shoe if they fit.
Been using Sidi shoes for well over 20 years... Decided to break free and try the Lake 402's Impressive quality, supple leather, boa fasteners and one hell of a stiff sole. I first ordered 42's I have narrow low volume feet but immediately noticed the shoe digging in on the lateral aspect of my foot neat the base of the metatarsal, the sole is not flat, the Lake sole is like a bathtub,… read more the sides curve up... the heat molding is more or less for the heel cup of the shoe so it would not affect the forefoot. A cool design as long as it does not hurt your foot. I sent them back and got 43's now they are way too big, no bueno. I still had the issue of the lateral foot pain.. I was thinking 42.5 but I decided to get DMT Vega shoes.. Competitive Cyclist was super accommodating on dealing with the returns. They are a class act. .
MWS
January 2, 2015Don't expect perfection on the first try
I found that I didn't start to really warm up to this shoe (pun intended) until I went through a few cycles of riding it, and adjusting it. Others might have been lucky enough to find nirvana with one molding session, but it took me a few tries to get everything adjusted. Fit wise, I wear a 45, which is the same size I've worn in Sidi, Shimano and DMT shoes. I have a fairly… read more narrow foot with a reasonably high arch, and I find the volume is comparable to those shoes as well, versus a high volume shoe like the old Carnac models (which fit me like a bathroom slipper). While not cheap, these shoes strikes a great balance of adjustability, old school materials and new school looks. Just give them the benefit of the doubt and don't judge them too harshly after only one session in the oven.
James C.
August 27, 2014Nice shoes
The fit is true to size for me. I wear an 11 and the 45 Lake fits perfectly. In fact, the fit was so good, I only heat molded the insole. There is a good amount of room in the toe box which is a welcome treat compared to Sidi's, Northwave, and Mavic. On the bike, the shoe is very supportive but not constricting. This allows my knees to track properly while the foot pressure is… read more evenly distributed, which is a problem I have had other shoes. The carbon soles are solid. I do not notice any flex. The kangaroo leather uppers are a treat. They are very supple, far more so than the artificial leather used in other shoes. This allows the dual Boa closures ability to fine tune the pressure to really be put to good effect. No hot spots anywhere. Also, the leather seems to breathe very well. Even riding on 100 degree days here in Texas, my feet were never too hot as happens with some plastic leathers, even those that are well vented. My guess is the excellent fit, supple leather uppers, and the twin Boa closures have a lot to do with this. These are the best cycling shoes I have ever worn.
John
January 6, 2018Hi, Considering buying these shoes. I'm on the edge of 2 different sizes. Do these run longer or shorter than average? Or are they true to size? Thanks
Roger
June 8, 2017Dear Sir, Recently I got a pair of Lake CX402 Carbon Shoe. However, after curing or heating it up in a oven, I notice some bubbles like on the surface on the carbon. (Please refer to the pictures as per attached) Question: Is this condition normal or will it becomes brittle and liable to break easily or is there anything I need to worry? Thank you!!! Regards, Roger
Jeremy P.
January 9, 2016Is the sole molded at home or does it need to be done in a shop?
yourDisplayName
March 17, 2014The description says they are available...
The description says they are available in wide width in the black/black version. Do you have this version available?
Lake CX402 Cycling Shoe - Men's Questions and Answers
No Questions Yet.
Lake CX402 Cycling Shoe - Men's Price History
No price history yet.